1 2 3 4 5 6 7

Por favor, use este identificador para citar o enlazar este ítem: http://dspace.uan.mx:8080/jspui/handle/123456789/1584
Título : ANALISIS COMPARATIVO DE LA SUPERFICIE DE RESINA Y SU ADHESION, POSTERIOR A LA APLICACION DE CUATRO DIFERENTES SUSTANCIAS USANDO LA TECNICA DEL CEMENTADO INDIRECTO DE BRACKETS
Autor : GUTIERREZ ROJO, JAIME FABIAN
DELGADO SANDOVAL, DAMARIS
Palabras clave : cementado de brackets
Superficie de Resina
Acetona
Alcohol
ácido fosfórico
Cemented brackets
Resin Surface
Acetone  
Phosphoric acid
Fecha de publicación : dic-2012
Editorial : Universidad Autónoma de Nayarit
Resumen : El cementado de brackets indirecto es una técnica de cementado que nos permite colocar el bracket en la mejor posición posible, como se trabaja en modelos de yeso es fácil visualizar desde todos los ángulos la posición del bracket. Para la limpieza de la superficie de la resina en la base del bracket se recurre a sustancias químicas como acetona, alcohol y ácido fosfórico. La formación de una interfase entre la resina previamente foto curada y el adhesivo en la base del bracket es común en esta técnica, esta interfase hace que sea más fácil la limpieza del diente a la hora del desprendimiento de brackets. En el presente trabajo de tesis se analizó las características físicas y químicas que sufre la superficie de la resina de la base del bracket al ser de cementado del modelo de yeso en la técnica indirecta y aplicándole en la superficie de la resina acetona pura, metil metacrilato, etanol al 96% y ácido fosfórico al 35%. También se estudió la fuerza de decementado de brackets al cementar los con la técnica de cementado indirecto posterior a la aplicación de las sustancias antes mencionadas. Las muestras estudiadas fueron premolares humanos, brackets de incisivos inferiores y de premolares Standart .022" metálicos con resina en la base.
Descripción : The bonding of indirect brackets is a cementing technique that allows us to place the bracket in the best possible position, as we work in plaster models it is easy to visualize from all angles the position of the bracket. To clean the surface of the resin at the base of the bracket, chemical substances such as acetone, alcohol and phosphoric acid are used. The formation of an interface between the previously cured photo resin and the adhesive at the base of the bracket is common in this technique, this interface makes it easier to clean the tooth at the time of bracket detachment. In this thesis the physical and chemical characteristics suffered by the surface of the resin of the base of the bracket were analyzed by cementing the gypsum model in the indirect technique and applying to the surface of the resin pure acetone, methyl methacrylate , 96% ethanol and 35% phosphoric acid. The strength of deceased brackets was also studied when cementing them with the indirect cementing technique subsequent to the application of the aforementioned substances. The samples studied were human premolars, brackets of lower incisors and of Standart .022 "metal premolars with resin in the base.
URI : http://dspace.uan.mx:8080/jspui/handle/123456789/1584
Aparece en las colecciones: Especialidad en Ortodoncia



Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.